Learn more about Water 4 Gas
Installing an HHO generator is fairly easy and can be done without any extensive knowledge of automobiles whatsoever. Of course, having a little “hands on” experience of cars is a definite plus, but it isn’t an absolute prerequisite. An HHO generator, as the name suggests, generates HHO, which also goes by the name of Brown gas. It is this gas which upon mixing with petrol, will form a powerful mixture which will drive your engine and hence the car.
It’s important to note here, that due diligence needs to be exercised while installing the HHO generator unit. Although it is easy, it does no mean that you can afford to “slack” while installing it. HHO explodes, but only when in contact with gas, and so you are not dealing with kid’s stuff here. Don’t assume that you know everything. In case of a doubt or a question, ask your neighborhood mechanic or anyone else who might be in a position to help you.
It’s important to test your HHO generator before installation. An untested generator might not wok after complete installation and hence may call for a repetition of the entire process. When it comes to the actual installation, there are few things to keep in mind.
Run Your Car on Water
Since, the HHO gas is released into the air intake sensors (after formation), the wire around this area could cause a flashback. An explosion can also occur in case the wires around the intake sensors are hot. In order to eliminate this possibility, make sure that you install your HHO generator when your car has not been used for the last couple of hours. You need to place the unit between the sensor and the throttle body, since heat is mostly absent in this area. Again, don’t assume that you know everything and in case of a doubt, ask.
When it comes to the HHO unit, it would be a better idea to use a fuse, so as to prevent any short circuit within or near the unit. For different models, different wiring instructions need to be followed due to varying designs of these engines. Also, since different engines require distinctive HHO quantity, due to their varying power requirements, so it would be a better idea to use a flashback arrestor mechanism on your generator. Such a mechanism can significantly reduce the chances of any flashbacks or explosions.
Also, before installation, make sure that your HHO generator is not running while the vehicle is shut off. This will prevent any unnecessary leakage or accumulation of HHO inside the car hood.
Read more about Water 4 Gas Here
This has also been published as:
Showing posts with label alternative energy. Show all posts
Showing posts with label alternative energy. Show all posts
Saturday, June 28, 2008
Precautions For Installing Water For Gas Generators
Learn more about Water 4 Gas
Installing an HHO generator is fairly easy and can be done without any extensive knowledge of automobiles whatsoever. Of course, having a little “hands on” experience of cars is a definite plus, but it isn’t an absolute prerequisite. An HHO generator, as the name suggests, generates HHO, which also goes by the name of Brown gas. It is this gas which upon mixing with petrol, will form a powerful mixture which will drive your engine and hence the car.
It’s important to note here, that due diligence needs to be exercised while installing the HHO generator unit. Although it is easy, it does no mean that you can afford to “slack” while installing it. HHO explodes, but only when in contact with gas, and so you are not dealing with kid’s stuff here. Don’t assume that you know everything. In case of a doubt or a question, ask your neighborhood mechanic or anyone else who might be in a position to help you.
It’s important to test your HHO generator before installation. An untested generator might not wok after complete installation and hence may call for a repetition of the entire process. When it comes to the actual installation, there are few things to keep in mind.
Run Your Car on Water
Since, the HHO gas is released into the air intake sensors (after formation), the wire around this area could cause a flashback. An explosion can also occur in case the wires around the intake sensors are hot. In order to eliminate this possibility, make sure that you install your HHO generator when your car has not been used for the last couple of hours. You need to place the unit between the sensor and the throttle body, since heat is mostly absent in this area. Again, don’t assume that you know everything and in case of a doubt, ask.
When it comes to the HHO unit, it would be a better idea to use a fuse, so as to prevent any short circuit within or near the unit. For different models, different wiring instructions need to be followed due to varying designs of these engines. Also, since different engines require distinctive HHO quantity, due to their varying power requirements, so it would be a better idea to use a flashback arrestor mechanism on your generator. Such a mechanism can significantly reduce the chances of any flashbacks or explosions.
Also, before installation, make sure that your HHO generator is not running while the vehicle is shut off. This will prevent any unnecessary leakage or accumulation of HHO inside the car hood.
Read more about Water 4 Gas Here
This has also been published as: water 4 gas on Tumblr, run your car on water on Wordpress, alternative energy on Wetpaint
Installing an HHO generator is fairly easy and can be done without any extensive knowledge of automobiles whatsoever. Of course, having a little “hands on” experience of cars is a definite plus, but it isn’t an absolute prerequisite. An HHO generator, as the name suggests, generates HHO, which also goes by the name of Brown gas. It is this gas which upon mixing with petrol, will form a powerful mixture which will drive your engine and hence the car.
It’s important to note here, that due diligence needs to be exercised while installing the HHO generator unit. Although it is easy, it does no mean that you can afford to “slack” while installing it. HHO explodes, but only when in contact with gas, and so you are not dealing with kid’s stuff here. Don’t assume that you know everything. In case of a doubt or a question, ask your neighborhood mechanic or anyone else who might be in a position to help you.
It’s important to test your HHO generator before installation. An untested generator might not wok after complete installation and hence may call for a repetition of the entire process. When it comes to the actual installation, there are few things to keep in mind.
Run Your Car on Water
Since, the HHO gas is released into the air intake sensors (after formation), the wire around this area could cause a flashback. An explosion can also occur in case the wires around the intake sensors are hot. In order to eliminate this possibility, make sure that you install your HHO generator when your car has not been used for the last couple of hours. You need to place the unit between the sensor and the throttle body, since heat is mostly absent in this area. Again, don’t assume that you know everything and in case of a doubt, ask.
When it comes to the HHO unit, it would be a better idea to use a fuse, so as to prevent any short circuit within or near the unit. For different models, different wiring instructions need to be followed due to varying designs of these engines. Also, since different engines require distinctive HHO quantity, due to their varying power requirements, so it would be a better idea to use a flashback arrestor mechanism on your generator. Such a mechanism can significantly reduce the chances of any flashbacks or explosions.
Also, before installation, make sure that your HHO generator is not running while the vehicle is shut off. This will prevent any unnecessary leakage or accumulation of HHO inside the car hood.
Read more about Water 4 Gas Here
This has also been published as: water 4 gas on Tumblr, run your car on water on Wordpress, alternative energy on Wetpaint
Friday, June 27, 2008
The Future of "Water For Gas" Technology
Learn more about Water 4 Gas
With rising pollution and huge emission of green house gases, it is paramount that we search for alternative fuels. This need becomes even more vital in the wake of ever rising global oil prices.
Water for Gas or more specifically, HHO generators have proved to be a workable solution to these problems. This technology involves the formation of HHO or Brown gas, which is then fed into the car intake to produce more power, reduce emissions and hence propagate a cleaner burn. As with any new technology, there are many skeptics who believe that this is not a workable model on a large scale or for extended periods of time. However, recent adoption of HHO generators by several governments proves the contrary.
Run Your Car on Water
In a bid to cut down domestic air pollution, South Korea has become the first nation in the world to mandate HHO generators to be fitted in transport trucks. Only transport trucks are involved with this technology as of now, but future plans are well on their way to include even other vehicles.
In North America, a company by the name of Hydrorunner has independent third party verification of their product usability and quality assurance. Moreover, with increasing popularity of HHO generators, one manufacturer has actually approached the American government and is now listed on the official website of the U. S. Department of Energy. A yet another manufacturer has already forwarded its application to California Air Resources Board (CARB).
All these developments clearly prove the huge inherent potential in this technology. Although, still in its infancy, it has definitely proved its worth and we can safely presume its popular presence, atleast in the foreseeable future.
So, in case you are still wondering, whether water for gas is a scam or what, rest assured, this new technology can work wonders for your car’s mpg and your gas budget. Additionally, it can deliver the extreme satisfaction of taking an environment friendly drive.
Read more about Water 4 Gas Here
This has also been published as: fuel saving tips on Tumblr, alternative energy on Wordpress, water 4 gas on Wetpaint
With rising pollution and huge emission of green house gases, it is paramount that we search for alternative fuels. This need becomes even more vital in the wake of ever rising global oil prices.
Water for Gas or more specifically, HHO generators have proved to be a workable solution to these problems. This technology involves the formation of HHO or Brown gas, which is then fed into the car intake to produce more power, reduce emissions and hence propagate a cleaner burn. As with any new technology, there are many skeptics who believe that this is not a workable model on a large scale or for extended periods of time. However, recent adoption of HHO generators by several governments proves the contrary.
Run Your Car on Water
In a bid to cut down domestic air pollution, South Korea has become the first nation in the world to mandate HHO generators to be fitted in transport trucks. Only transport trucks are involved with this technology as of now, but future plans are well on their way to include even other vehicles.
In North America, a company by the name of Hydrorunner has independent third party verification of their product usability and quality assurance. Moreover, with increasing popularity of HHO generators, one manufacturer has actually approached the American government and is now listed on the official website of the U. S. Department of Energy. A yet another manufacturer has already forwarded its application to California Air Resources Board (CARB).
All these developments clearly prove the huge inherent potential in this technology. Although, still in its infancy, it has definitely proved its worth and we can safely presume its popular presence, atleast in the foreseeable future.
So, in case you are still wondering, whether water for gas is a scam or what, rest assured, this new technology can work wonders for your car’s mpg and your gas budget. Additionally, it can deliver the extreme satisfaction of taking an environment friendly drive.
Read more about Water 4 Gas Here
This has also been published as: fuel saving tips on Tumblr, alternative energy on Wordpress, water 4 gas on Wetpaint
Subscribe to:
Posts (Atom)